ARS VA-7Z pruning shears
ARS VA-7Z pruning shears – anvil design, 22 mm cutting capacity
What does an anvil design mean?
Most pruning shears are bypass tools: two blades pass each other like scissors. On an anvil pruner, a single sharp blade presses down onto a flat, blunt surface instead. That transfers far more force to the cutting edge, but it also compresses the branch slightly from the sides. This is why anvil pruners belong on hard and dead wood rather than living, sappy shoots.
When to choose it
On dry twigs, dead branches and hard wood, the anvil design does the job with less effort than a bypass pruner of the same size. For cutting living branches, a bypass tool leaves a cleaner cut face, which matters for how the plant recovers. That is the job of the VS series.
The two sizes in the VA series
The two models share the same construction; only the size and capacity differ.
| Model | Overall length | Blade length | Cutting capacity | Weight |
|---|---|---|---|---|
| VA-7Z (this product) | 180 mm | 35 mm | 22 mm | 215 g |
| VA-8Z | 205 mm | 47 mm | 25 mm | 235 g |
Fluorocarbon coating
The high-carbon steel blade carries a fluorocarbon coating that reduces friction and stops sap sticking to it. On an anvil pruner this is particularly useful, since the larger contact area tends to collect more residue. The ARS GO-1 blade cleaner takes care of cleaning.
Why choose the ARS VA-7Z?
- Anvil design for hard and dead wood
- 180 mm length, 35 mm blade, 22 mm cutting capacity
- Fluorocarbon-coated high-carbon steel blade
- Suitable for both left- and right-handed use
- 215 g, with replaceable parts
Frequently asked questions
What is the difference between anvil and bypass pruners?
On a bypass pruner two blades pass each other, giving a clean cut on living wood. On an anvil pruner a single sharp blade presses onto a blunt surface, which delivers more force for hard and dead wood but compresses living branches slightly.
How thick a branch will the ARS VA-7Z cut?
Up to 22 mm in diameter according to the manufacturer.
What is the difference between the VA-7Z and the VA-8Z?
Size and capacity: the VA-7Z is 180 mm and cuts to 22 mm, the VA-8Z is 205 mm and cuts to 25 mm. See the VA-8Z product page.
Are they suitable for pruning living branches?
For living, sappy growth a bypass tool leaves a cleaner cut face, such as the VS series. The anvil design is primarily for hard and dead wood.
The ARS VA-7Z pruning shears use an anvil design, which makes them suited to hard and dead wood. 180 mm long, 35 mm blade, 22 mm cutting capacity, 215 grams. The fluorocarbon-coated, high-carbon steel blade cuts with less friction. For living, sappy growth the bypass VS series shears are the better choice.
High Carbon Steel
Carbon steel is sharp, wear-resistant and easy to sharpen. It offers great precision and durability, ideal for professional pruning. Regular maintenance greatly extends its lifespan.
Hard Chrome Coating
Hard chrome-plated blades offer extra protection against rust and wear. The smooth surface resists plant sap and retains its sharpness for longer. Designed for heavy-duty use.
For Smaller Hands
A design specifically built for smaller hand sizes. The tool has a shorter grip span and handle, making it easier and more comfortable to control. It provides a secure grip and significantly reduces hand fatigue during long pruning sessions.
KWF Professional Certification
German KWF Professional certification: an internationally recognized quality standard. The product has been thoroughly tested for durability, safety and ergonomics.
The KWF certification (Germany) is an internationally recognized quality standard. Only products that meet the strictest safety and ergonomic requirements receive it. This independent assessment confirms professional-grade quality.
More information: www.kwf-online.de
- Quality certified by an independent institute
- Compliance with strict safety requirements
- Durability and easy handling
- For intensive forestry and landscaping work
- Proven ARS quality and expertise
